{"id":2481,"date":"2026-06-01T12:27:52","date_gmt":"2026-06-01T12:27:52","guid":{"rendered":"https:\/\/www.thefullerene.com\/?p=2481"},"modified":"2026-07-13T07:00:35","modified_gmt":"2026-07-13T07:00:35","slug":"why-metal-free-fullerene-c60-is-crucial-for-33-percent-perovskite-efficiency","status":"publish","type":"post","link":"https:\/\/www.thefullerene.com\/ko\/why-metal-free-fullerene-c60-is-crucial-for-33-percent-perovskite-efficiency\/","title":{"rendered":"\uae08\uc18d\uc774 \uc5c6\ub294 \ud480\ub7ec\ub80c C60\uc774 33.33%\uc758 \ud398\ub85c\ube0c\uc2a4\uce74\uc774\ud2b8 \ud6a8\uc728 \uc784\uacc4\uac12\uc5d0 \ub3c4\ub2ec\ud558\ub294 \ub370 \uc911\uc694\ud55c \uc774\uc720"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">A perovskite\u2013silicon tandem solar cell reported in 2026 reached a measured power conversion efficiency of 33.33% and a certified efficiency of 32.89% on an active area of approximately 1 cm\u00b2. The result is technically important, but its cause must be described accurately. The principal innovation was not a newly demonstrated \u201cmetal-free\u201d grade of <a href=\"https:\/\/www.thefullerene.com\/about-fullerene\/what-is-fullerene-c60\/\">Fullerene C60<\/a>. It was a peak-selective passivation strategy designed to suppress electrical leakage at the sharp pyramid peaks of an industrially textured silicon bottom cell.<sup><a href=\"#ref-1\">[1]<\/a><\/sup><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">C60 may still form an important electron-transporting contact in the perovskite top-cell stack, as it does in many inverted perovskite and perovskite\u2013silicon tandem architectures. However, the presence of C60 in a high-efficiency device does not mean that C60 purity alone produced the efficiency result. Nor does the published record establish that completely metal-free C60 is a prerequisite for reaching 33% efficiency.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This distinction matters for researchers and photovoltaic material teams. It allows the result to inform C60 qualification without converting a device-level interface-engineering study into an unsupported raw-material claim. The correct question is not whether a supplier can attach \u201cmetal-free\u201d to a C60 product. It is which C60 attributes can affect deposition, interface quality and process repeatability, and which analytical evidence is needed to evaluate those attributes.<\/p>\n\n\n\n<h2 id=\"key-takeaways\" class=\"wp-block-heading\">Key Takeaways<\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li>The 32.89%-certified tandem result was primarily enabled by selective Al\u2082O\u2083 passivation of leakage-prone silicon pyramid peaks, not by a demonstrated metal-free C60 formulation.<\/li>\n\n\n\n<li>C60 remains important in many p\u2013i\u2013n tandem stacks because it forms an electron-selective contact, but the perovskite\/C60 interface can also introduce non-radiative recombination losses.<\/li>\n\n\n\n<li>C60 source quality should be evaluated through application-relevant purity, oxygen control, evaporation behavior and device repeatability rather than unsupported \u201czero metal\u201d claims.<\/li>\n<\/ul>\n\n\n\n<h2 id=\"what-the-33-33-tandem-cell-study-reported\" class=\"wp-block-heading\">What the 33.33% Tandem-Cell Study Reported<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The 2026 study, published in <em>Matter<\/em>, addressed a geometric and electrical problem found when perovskite top cells are fabricated on industrially textured silicon bottom cells. Commercial crystalline-silicon surfaces are commonly textured with microscopic pyramids to improve optical performance. These structures are useful for light management, but their high-curvature peaks make uniform deposition of the upper functional layers difficult.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If the perovskite and transport layers become too thin or discontinuous around a pyramid peak, the region can develop an increased local electric field or form a leakage pathway. A small number of these weak locations can reduce fill factor, lower effective voltage and accelerate local degradation even when the rest of the device is well formed.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">To address this problem, the research team developed a peak-selective passivation strategy. Polystyrene nanospheres were used as a self-aligned template so that a thin aluminum oxide layer could be deposited selectively at the pyramid apex regions. After the template was removed, the Al\u2082O\u2083 remained at the locations most susceptible to electrical leakage.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The resulting device reached 33.33% measured efficiency and 32.89% certified efficiency over an active area of about 1 cm\u00b2. The authors also reported that the device retained approximately 90% of its initial efficiency after 1,000 hours of continuous operation under the stated test conditions.<sup><a href=\"#ref-1\">[1]<\/a><\/sup><sup><a href=\"#ref-2\">[2]<\/a><\/sup><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">These figures should be reproduced with their qualifications. The measured value and certified value are different, and neither should be described as a universal 33.33% threshold. At the time of the institutional announcement, higher perovskite\u2013silicon tandem records had already been reported, so the significance of the paper lies in its device architecture, compatibility with industrial texture and leakage-control strategy rather than in establishing a new minimum efficiency requirement.<sup><a href=\"#ref-2\">[2]<\/a><\/sup><\/p>\n\n\n\n<h2 id=\"what-the-study-did-not-demonstrate-about-c60\" class=\"wp-block-heading\">What the Study Did Not Demonstrate About C60<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The study does not support the claim that completely metal-free C60 was responsible for the reported efficiency. Its central experimental variable was the selective Al\u2082O\u2083 passivation of the silicon pyramid peaks. The public abstract and institutional description do not identify C60 elemental purity as the mechanism responsible for the efficiency improvement.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This does not mean that C60 quality is irrelevant. It means that the evidence must be assigned to the correct level of the device.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A tandem cell contains many coupled components: the silicon bottom cell, recombination junction, hole-selective contact, wide-bandgap perovskite absorber, passivation layers, electron-selective contact, transparent electrode, optical layers and metal contacts. A performance change can arise from any of these components or from their interactions. When a study modifies one structural feature and holds the remaining process as constant as practicable, the demonstrated effect belongs primarily to that modified feature.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It is therefore not scientifically valid to infer the following chain without direct evidence:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><em>The device used C60; the device reached more than 33% efficiency; therefore the C60 must have been entirely metal-free; therefore entirely metal-free C60 is required for all devices above 33%.<\/em><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Each step introduces an unsupported assumption. A defensible article should instead separate the published device result from the broader evidence concerning C60 source quality.<\/p>\n\n\n\n<figure class=\"wp-block-image aligncenter size-large\"><img decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/z1_39d5f7-1024x576.webp\" alt=\"NIMTE 33.33 Percent Perovskite Tandem Cell: A high-resolution photo of the 33.33% efficient perovskite\/silicon tandem solar cell developed by Prof. Ye Jichun&#039;s team at NIMTE.\" class=\"wp-image-2482\" title=\"\" srcset=\"https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/z1_39d5f7-1024x576.webp 1024w, https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/z1_39d5f7-720x405.webp 720w, https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/z1_39d5f7-300x169.webp 300w, https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/z1_39d5f7-768x432.webp 768w, https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/z1_39d5f7-1536x864.webp 1536w, https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/z1_39d5f7-18x10.webp 18w, https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/z1_39d5f7.webp 1920w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><figcaption class=\"wp-element-caption\">NIMTE 33.33 Percent Perovskite Tandem Cell<\/figcaption><\/figure>\n\n\n\n<h2 id=\"where-c60-fits-in-a-perovskite-silicon-tandem-device\" class=\"wp-block-heading\">Where C60 Fits in a Perovskite\u2013Silicon Tandem Device<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">In many monolithic perovskite\u2013silicon tandem cells, the perovskite top cell uses an inverted, or p\u2013i\u2013n, architecture. Starting from the bottom side of the perovskite subcell, a simplified stack can include a hole-selective layer, a wide-bandgap perovskite absorber, an electron-transport layer, a buffer or protective layer and a transparent conductive electrode.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">C60 is widely used as the electron-transport layer in this type of device. It has electron-accepting character, suitable electron-transport properties and energy levels that can support electron extraction while restricting holes. Thermal evaporation can also form thin C60 layers without exposing the underlying perovskite to a liquid solvent.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">These advantages explain why thermally evaporated C60 has been described in peer-reviewed research as a near-ubiquitous ETL in state-of-the-art p\u2013i\u2013n perovskite-based solar cells.<sup><a href=\"#ref-3\">[3]<\/a><\/sup><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">However, the ETL does not operate independently. Its performance depends on:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>the surface chemistry and defect density of the perovskite;<\/li>\n\n\n\n<li>the energy-level alignment across the interface;<\/li>\n\n\n\n<li>the continuity and thickness of the deposited C60 film;<\/li>\n\n\n\n<li>the presence of passivation or buffer layers;<\/li>\n\n\n\n<li>thermal and vacuum deposition conditions;<\/li>\n\n\n\n<li>ionic movement during operation;<\/li>\n\n\n\n<li>the subsequent electrode stack.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">For a deeper treatment of the material\u2019s function, see <a href=\"https:\/\/www.thefullerene.com\/c60-electron-transport-layer-perovskite-silicon-tandem\/\">C60 electron transport layers in perovskite\u2013silicon tandem solar cells<\/a>.<\/p>\n\n\n\n<h2 id=\"the-perovskite-c60-interface-is-useful-but-not-loss-free\" class=\"wp-block-heading\">The Perovskite\/C60 Interface Is Useful but Not Loss-Free<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">C60 should not be described as automatically passivating every perovskite surface or eliminating all charge-recombination pathways. The interface can support electron extraction, but it can also become a major source of voltage loss.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Studies of inverted perovskite cells have shown that non-radiative recombination frequently occurs at the perovskite\/C60 interface. Proposed contributors include interfacial defects, unfavorable local energy alignment, charge-transfer states, chemical interactions and ion accumulation.<sup><a href=\"#ref-4\">[4]<\/a><\/sup><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A 2025 study of perovskite\u2013silicon tandem cells reported substantial quasi-Fermi-level splitting losses after C60 deposition on an untreated or incompletely passivated perovskite surface. The researchers reduced these losses using a bilayer AlO<sub>x<\/sub>\/PDAI<sub>2<\/sub> interface treatment, demonstrating that the quality of the interface surrounding C60 can be as important as the presence of C60 itself.<sup><a href=\"#ref-5\">[5]<\/a><\/sup><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This observation changes how C60 should be discussed in high-efficiency devices. C60 is not a standalone efficiency additive. It is one component of an engineered electron-selective contact. Its contribution can only be understood together with perovskite surface preparation, interlayers, deposition conditions and the complete energy-loss budget.<\/p>\n\n\n\n<h2 id=\"why-c60-source-quality-can-still-matter\" class=\"wp-block-heading\">Why C60 Source Quality Can Still Matter<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Although the 32.89%-certified peak-passivation study does not establish a metal-free requirement, independent research does show that C60 source quality can affect repeated thermal evaporation and device reproducibility.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In a 2024 <em>Nature Communications<\/em> study, researchers compared commercial as-received C60 with further sublimed material. The as-received source could coalesce during repeated evaporation, while additional sublimation reduced this behavior. The study associated the coalescence with oxygen in the initial <a href=\"https:\/\/www.thefullerene.com\/about-fullerene\/what-is-fullerene-c60\/\">C60 powder<\/a> and linked it to deep states and declining device performance during repeated processing.<sup><a href=\"#ref-3\">[3]<\/a><\/sup><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Using further purified C60, the researchers obtained reproducible perovskite\u2013silicon tandem performance over eight repeated evaporation processes. One device achieved a certified efficiency of 30.9%. This is strong evidence that source preparation and repeated-use behavior can matter in a thermal evaporation workflow.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It is not evidence that a single HPLC number guarantees device performance. Nor is it evidence that all undesirable behavior is caused by transition metals. In that study, oxygen-related source behavior and sublimation purification were central to the result.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The material qualification question should therefore be broadened from \u201cIs the C60 metal-free?\u201d to:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>What is the chromatographic definition of the reported C60 purity?<\/li>\n\n\n\n<li>Has the material been purified or conditioned for thermal evaporation?<\/li>\n\n\n\n<li>Does it show stable evaporation behavior over the intended number of cycles?<\/li>\n\n\n\n<li>Are oxygen-containing species or other source changes monitored?<\/li>\n\n\n\n<li>Does the deposited film remain uniform and electronically consistent?<\/li>\n\n\n\n<li>Does the same batch produce reproducible device results under controlled processing?<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">The site\u2019s guide to <a href=\"https:\/\/www.thefullerene.com\/c60-hplc-purity-analysis\/\">C60 HPLC purity analysis<\/a> explains why chromatographic purity answers only part of this qualification problem.<\/p>\n\n\n\n<h2 id=\"does-trace-metal-content-matter-in-a-c60-etl\" class=\"wp-block-heading\">Does Trace Metal Content Matter in a C60 ETL?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Elemental impurities can matter in electronic materials, but their effect must be established through appropriate analysis and device evidence. Different elements, chemical forms, particle sizes and concentrations may behave differently. A dissolved ionic species is not equivalent to an embedded inorganic particle, and a surface contaminant is not necessarily equivalent to an impurity distributed throughout the source powder.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Potential concerns may include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>creation of electronic trap states;<\/li>\n\n\n\n<li>changes in film nucleation or morphology;<\/li>\n\n\n\n<li>altered evaporation residue;<\/li>\n\n\n\n<li>unintended redox or interfacial reactions;<\/li>\n\n\n\n<li>variation between deposition cycles;<\/li>\n\n\n\n<li>contamination of vacuum equipment.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">These are legitimate reasons to control elemental impurities. They do not justify stating that any detectable amount of nickel, cobalt, iron or copper automatically prevents a tandem cell from reaching 33% efficiency.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A meaningful low-metal specification should identify the elements, the analytical technique, the sample-preparation method, the units and the reporting limits. ICP-MS or ICP-OES may be used for selected elemental measurements, but the result must be connected to the actual batch. A combustion-based or nominally catalyst-free production route cannot by itself establish that the final powder contains no trace metals.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Absolute terms such as \u201czero metals,\u201d \u201ccompletely metal-free\u201d and \u201cintrinsically free of heavy metals\u201d should therefore be avoided unless they are rewritten as bounded process statements or batch-specific analytical results.<\/p>\n\n\n\n<figure class=\"wp-block-image aligncenter size-full\"><img decoding=\"async\" width=\"2560\" height=\"1842\" src=\"https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/metals-13-00528-g002-scaled.png\" alt=\"\" class=\"wp-image-2485\" title=\"\" srcset=\"https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/metals-13-00528-g002-scaled.png 2560w, https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/metals-13-00528-g002-scaled-720x518.png 720w, https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/metals-13-00528-g002-300x216.png 300w, https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/metals-13-00528-g002-1024x737.png 1024w, https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/metals-13-00528-g002-768x553.png 768w, https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/metals-13-00528-g002-1536x1105.png 1536w, https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/metals-13-00528-g002-2048x1474.png 2048w, https:\/\/www.thefullerene.com\/wp-content\/uploads\/2026\/06\/metals-13-00528-g002-18x12.png 18w\" sizes=\"(max-width: 2560px) 100vw, 2560px\" \/><figcaption class=\"wp-element-caption\">Peak-Selective Passivation Al2O3 Diagram<\/figcaption><\/figure>\n\n\n\n<h2 id=\"hplc-purity-and-elemental-purity-are-different-specifications\" class=\"wp-block-heading\">HPLC Purity and Elemental Purity Are Different Specifications<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">High-performance liquid chromatography can separate and quantify chromatographically detectable fullerene species under a defined method. It is useful for evaluating C60 relative to C70, higher fullerenes and certain organic fullerene-related impurities.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It does not normally quantify total elemental impurities. A sample described as 99.95% by HPLC area may still contain substances that:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>do not dissolve in the HPLC sample solvent;<\/li>\n\n\n\n<li>are removed by filtration;<\/li>\n\n\n\n<li>do not absorb significantly at the selected detector wavelength;<\/li>\n\n\n\n<li>co-elute with C60;<\/li>\n\n\n\n<li>are volatile and lost during sample preparation;<\/li>\n\n\n\n<li>are inorganic and not represented by the chromatographic calculation.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">For photovoltaic material evaluation, separate questions may require separate methods:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Question<\/th><th>Possible analytical approach<\/th><\/tr><\/thead><tbody><tr><td>Is C60 the dominant chromatographically detectable fullerene?<\/td><td>HPLC with a suitable column, detector and calculation method<\/td><\/tr><tr><td>Does the sample have the expected molecular identity?<\/td><td>Mass spectrometry and complementary spectroscopy<\/td><\/tr><tr><td>Are selected elements present above specified limits?<\/td><td>ICP-MS, ICP-OES or another validated elemental method<\/td><\/tr><tr><td>Are volatile process solvents present?<\/td><td>Headspace GC or GC-MS<\/td><\/tr><tr><td>Does the source behave consistently during heating and evaporation?<\/td><td>Thermal analysis, evaporation trials, source-residue inspection and film characterization<\/td><\/tr><tr><td>Does the material support reproducible devices?<\/td><td>Controlled device fabrication across batches and repeated evaporation cycles<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">No single result should be expanded beyond the property it actually measures.<\/p>\n\n\n\n<h2 id=\"what-high-purity-c60-should-mean-for-tandem-cell-development\" class=\"wp-block-heading\">What \u201cHigh-Purity C60\u201d Should Mean for Tandem-Cell Development<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">For perovskite photovoltaic research, \u201chigh-purity C60\u201d is most useful when treated as a multidimensional material definition rather than a single percentage.<\/p>\n\n\n\n<h3 id=\"chromatographic-composition\" class=\"wp-block-heading\">Chromatographic composition<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The HPLC method should separate the fullerene-related components relevant to the intended specification. The report should state whether the percentage represents area normalization, calibrated assay or another calculation.<\/p>\n\n\n\n<h3 id=\"thermal-evaporation-suitability\" class=\"wp-block-heading\">Thermal evaporation suitability<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">A source intended for thermal evaporation should be evaluated under the actual temperature, vacuum and reuse conditions. Powder appearance alone cannot predict whether the material will coalesce, form residue, change composition or produce a consistent deposition rate.<\/p>\n\n\n\n<h3 id=\"elemental-impurity-control\" class=\"wp-block-heading\">Elemental impurity control<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">If specific metals are relevant to the device process, they should be named and measured. \u201cNo metallic residue\u201d is not a complete specification without elements, units, method and limits.<\/p>\n\n\n\n<h3 id=\"oxygen-and-storage-history\" class=\"wp-block-heading\">Oxygen and storage history<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The evidence linking oxygen-containing source material to repeated-evaporation behavior makes storage and handling relevant. Packaging should limit uncontrolled exposure appropriate to the established material sensitivity, but the exact storage requirement should be supported by stability or process data rather than generic language.<\/p>\n\n\n\n<h3 id=\"batch-to-batch-reproducibility\" class=\"wp-block-heading\">Batch-to-batch reproducibility<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">A single high-performing batch does not establish manufacturing consistency. Research and scale-up teams should compare deposition rate, source residue, film morphology, electrical properties and device metrics across multiple batches.<\/p>\n\n\n\n<h2 id=\"how-to-qualify-c60-for-a-high-efficiency-tandem-program\" class=\"wp-block-heading\">How to Qualify C60 for a High-Efficiency Tandem Program<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A practical qualification program should begin with the device process and its likely failure modes.<\/p>\n\n\n\n<h3 id=\"define-the-deposition-process\" class=\"wp-block-heading\">Define the deposition process<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Specify whether C60 will be thermally evaporated, deposited from solution or integrated through another method. A grade suitable for solution research is not automatically qualified for repeated vacuum evaporation.<\/p>\n\n\n\n<h3 id=\"define-the-relevant-material-attributes\" class=\"wp-block-heading\">Define the relevant material attributes<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Identify which variables are most likely to affect the program: fullerene composition, volatile residue, oxygen-related source behavior, selected metals, moisture exposure, thermal residue, particle contamination or batch variability.<\/p>\n\n\n\n<h3 id=\"review-analytical-methods-not-only-reported-values\" class=\"wp-block-heading\">Review analytical methods, not only reported values<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">A 99.95% value should be accompanied by its method and calculation basis. Elemental results should identify the measured elements and reporting limits. Statements such as \u201cnot detected\u201d should never be interpreted without the limit of detection or quantitation.<\/p>\n\n\n\n<h3 id=\"run-repeated-evaporation-trials\" class=\"wp-block-heading\">Run repeated evaporation trials<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">For a source that will be reused, examine several sequential cycles. Monitor deposition rate, source morphology, residue, film uniformity and device performance rather than relying on a single first-cycle result.<\/p>\n\n\n\n<h3 id=\"separate-raw-material-effects-from-interface-engineering-effects\" class=\"wp-block-heading\">Separate raw-material effects from interface-engineering effects<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Use controlled device comparisons. When an interlayer, passivation treatment or substrate texture is changed, retain the same C60 batch where possible. When the C60 batch is changed, hold the interface treatment and deposition process constant. This prevents an improvement caused by one variable from being assigned to another.<\/p>\n\n\n\n<h2 id=\"how-the-32-89-study-should-inform-c60-buyers\" class=\"wp-block-heading\">How the 32.89% Study Should Inform C60 Buyers<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The peak-selective passivation study provides three useful lessons for C60 users, even though it does not demonstrate a metal-free requirement.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">First, high-efficiency tandem performance depends on local interface quality. Thin regions, sharp features and incomplete coverage can dominate device losses. A nominal material purity percentage cannot compensate for a defective geometry or poorly engineered contact.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Second, industrially relevant substrates create different challenges from flat laboratory substrates. Material qualification must eventually be performed in the intended texture, area and deposition process.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Third, C60 should be evaluated as part of a complete electron-selective interface. Source quality, perovskite passivation, film continuity, energy alignment and upper-electrode processing all contribute to the final result.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For teams moving from exploratory cells toward repeatable tandem fabrication, The Fullerene can support evaluation of <a href=\"https:\/\/www.thefullerene.com\/product-category\/fullerene-c60\/\">Fullerene C60 grades<\/a> for research and electronic-material workflows. XCT should only present batch purity, elemental results and processing suitability according to the documentation available for the specific material.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/www.thefullerene.com\/request\/\">Discuss C60 requirements for a perovskite ETL process<\/a><\/p>\n\n\n\n<h2 id=\"faq-c60-and-33-perovskite-silicon-tandem-cells\" class=\"wp-block-heading\">FAQ: C60 and 33% Perovskite\u2013Silicon Tandem Cells<\/h2>\n\n\n\n<h3 id=\"did-metal-free-c60-enable-the-33-33-perovskite-silicon-tandem-result\" class=\"wp-block-heading\">Did metal-free C60 enable the 33.33% perovskite\u2013silicon tandem result?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The published study does not establish that conclusion. Its central innovation was selective Al\u2082O\u2083 passivation of leakage-prone pyramid peaks on an industrially textured silicon bottom cell. C60 may have been part of the electron-transport stack, but the reported efficiency improvement was not demonstrated as a consequence of metal-free C60.<\/p>\n\n\n\n<h3 id=\"what-was-the-certified-efficiency-of-the-tandem-cell\" class=\"wp-block-heading\">What was the certified efficiency of the tandem cell?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The study reported a measured efficiency of 33.33% and a certified efficiency of 32.89% for a device with an active area of approximately 1 cm\u00b2. The two values should not be presented as interchangeable.<\/p>\n\n\n\n<h3 id=\"why-is-c60-used-in-perovskite-silicon-tandem-solar-cells\" class=\"wp-block-heading\">Why is C60 used in perovskite\u2013silicon tandem solar cells?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">C60 is widely used as an electron-transport layer in inverted perovskite architectures because it can support electron extraction and hole blocking and can be deposited as a thin film by thermal evaporation. Its performance depends on the perovskite\/C60 interface and the surrounding device layers.<\/p>\n\n\n\n<h3 id=\"does-higher-hplc-purity-guarantee-higher-tandem-cell-efficiency\" class=\"wp-block-heading\">Does higher HPLC purity guarantee higher tandem-cell efficiency?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">No. HPLC purity describes chromatographically detected components under a defined method. Device efficiency also depends on source evaporation behavior, interface passivation, film morphology, substrate texture, energy alignment, electrodes and the full fabrication process.<\/p>\n\n\n\n<h3 id=\"can-a-catalyst-free-production-route-prove-that-c60-contains-no-trace-metals\" class=\"wp-block-heading\">Can a catalyst-free production route prove that C60 contains no trace metals?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">No. A route that does not intentionally use a metal catalyst can reduce one possible contamination source, but the final material must be tested if an elemental specification is required. Results should identify the tested elements, method, units and reporting limits.<\/p>\n\n\n\n<h3 id=\"what-c60-data-are-most-relevant-for-repeated-thermal-evaporation\" class=\"wp-block-heading\">What C60 data are most relevant for repeated thermal evaporation?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Relevant information may include the chromatographic method, purification history, selected elemental results, volatile residue, storage conditions, thermal behavior, source coalescence or residue, deposition consistency and device performance across repeated evaporation cycles.<\/p>\n\n\n\n<h2 id=\"references\" class=\"wp-block-heading\">References<\/h2>\n\n\n\n<ol class=\"wp-block-list\">\n<li>Yang, W. et al. \u201cSelective Passivation of Pyramid Peaks for 32.9%-Efficient Perovskite\/Silicon Tandem Solar Cells.\u201d <em>Matter<\/em>, 2026, Article 102824. DOI: 10.1016\/j.matt.2026.102824. <a href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S2590238526001876\" target=\"_blank\" rel=\"noopener\">Publisher record<\/a>.<\/li>\n\n\n\n<li>Chinese Academy of Sciences. \u201cNew Passivation Strategy Boosts Perovskite\/Silicon Tandem Solar Cell Performance.\u201d May 22, 2026. <a href=\"https:\/\/english.cas.cn\/newsroom\/research-news\/202605\/t20260520_1159630.shtml\" target=\"_blank\" rel=\"noopener\">Institutional research release<\/a>.<\/li>\n\n\n\n<li>Said, A. A. et al. \u201cSublimed C60 for Efficient and Repeatable Perovskite-Based Solar Cells.\u201d <em>Nature Communications<\/em>, 2024, 15, 337. <a href=\"https:\/\/www.nature.com\/articles\/s41467-024-44974-0\" target=\"_blank\" rel=\"noopener\">Full article<\/a>.<\/li>\n\n\n\n<li>Ye, F. et al. \u201cIdentification of the Cause of Nonradiative Recombination at the Perovskite\/C60 Interface in Inverted Perovskite Solar Cells.\u201d <em>Nature Communications<\/em>, 2022. <a href=\"https:\/\/www.nature.com\/articles\/s41467-022-34203-x\" target=\"_blank\" rel=\"noopener\">Full article<\/a>.<\/li>\n\n\n\n<li>Fang, L. et al. \u201cInterfacial Design Strategies for Stable and High-Efficiency Perovskite\/Silicon Tandem Solar Cells.\u201d <em>Nature Communications<\/em>, 2025. <a href=\"https:\/\/www.nature.com\/articles\/s41467-025-64467-y\" target=\"_blank\" rel=\"noopener\">Full article<\/a>.<\/li>\n\n\n\n<li>Artuk, K. et al. \u201c60 cm\u00b2 Perovskite\u2013Silicon Tandem Solar Cells with an Industrially Compatible Device Architecture.\u201d <em>Nature Communications<\/em>, 2025. <a href=\"https:\/\/www.nature.com\/articles\/s41467-025-63673-y\" target=\"_blank\" rel=\"noopener\">Full article<\/a>.<\/li>\n\n\n\n<li>Zhang, D. et al. \u201cIceberg-Like Pyramids in Industrially Textured Silicon Enabled 33% Efficient Perovskite\u2013Silicon Tandem Solar Cells.\u201d <em>Nature Communications<\/em>, 2025. <a href=\"https:\/\/www.nature.com\/articles\/s41467-025-62389-3\" target=\"_blank\" rel=\"noopener\">Full article<\/a>.<\/li>\n\n\n\n<li>The Fullerene. \u201cC60 Electron Transport Layer in Perovskite\/Silicon Tandem Solar Cells.\u201d <a href=\"https:\/\/www.thefullerene.com\/c60-electron-transport-layer-perovskite-silicon-tandem\/\">Technical guide<\/a>.<\/li>\n\n\n\n<li>The Fullerene. \u201cC60 HPLC Purity Analysis: How to Read Fullerene Chromatograms.\u201d <a href=\"https:\/\/www.thefullerene.com\/c60-hplc-purity-analysis\/\">Analytical guide<\/a>.<\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n","protected":false},"excerpt":{"rendered":"<p>A perovskite\u2013silicon tandem solar cell reported in 2026 reached a measured power conversion efficiency of 33.33% and a certified efficiency of 32.89% on an active area of approximately 1 cm\u00b2. The result is technically important, but its cause must be described accurately. The principal innovation was not a newly demonstrated \u201cmetal-free\u201d grade of Fullerene C60. [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":2482,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_gspb_post_css":"","footnotes":""},"categories":[46],"tags":[114],"class_list":["post-2481","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-technology","tag-buckminsterfullerene-c60"],"blocksy_meta":[],"acf":[],"_links":{"self":[{"href":"https:\/\/www.thefullerene.com\/ko\/wp-json\/wp\/v2\/posts\/2481","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.thefullerene.com\/ko\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.thefullerene.com\/ko\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.thefullerene.com\/ko\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.thefullerene.com\/ko\/wp-json\/wp\/v2\/comments?post=2481"}],"version-history":[{"count":2,"href":"https:\/\/www.thefullerene.com\/ko\/wp-json\/wp\/v2\/posts\/2481\/revisions"}],"predecessor-version":[{"id":3111,"href":"https:\/\/www.thefullerene.com\/ko\/wp-json\/wp\/v2\/posts\/2481\/revisions\/3111"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.thefullerene.com\/ko\/wp-json\/wp\/v2\/media\/2482"}],"wp:attachment":[{"href":"https:\/\/www.thefullerene.com\/ko\/wp-json\/wp\/v2\/media?parent=2481"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.thefullerene.com\/ko\/wp-json\/wp\/v2\/categories?post=2481"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.thefullerene.com\/ko\/wp-json\/wp\/v2\/tags?post=2481"}],"curies":[{"name":"\uc6cc\ub4dc\ud504\ub808\uc2a4","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}